Assemble and Don Battery and Belt
Don the Assembled Helmet and Hood
HOOD
≤ 1/2
Inch
(~1.25 cm)
DLC Flappers
FCC Side Tabs
1. Remove a fully charged Battery from the Charger and place the Belt
fully under the Battery Clip so that the Clip Detent touches the Clip,
Metal-to Metal.
2. Place the Belt comfortably around the waist
with the Battery near the side-back of the
right hip and lock the buckles together.
Assemble The Hood to The Helmet
1. Snap Lens Front Alignment Hole over
Helmet Front Mounting Post. Attach each
Lens Side Alignment Holes over Helmet Side
Mounting Posts.
2. Grasp the Hood at the seam between
Filter and Shroud(s) and pull Hood up and
over the Helmet.
4. Pull Hood Shroud(s)
down to shoulder
level.
1. Connect Helmet Power
Cord to Battery, loosen
Headband Ratchet Knob.
3. Check Cuff Tension
1
around
Face (Single Hood Only).
Tighten Ratchet knob
to secure Helmet for all
activities
1
.
NOTE
Generally, start with the ML (Medium/Large) size face/head
cover, unless the user has a particularly small size head.
Lens
Cuff
Single Hoods
2271PB-07 ML and SM
2271PS-07 ML and SM
2. Pull Cuff top edge
down, place Chin into
Cuff (Single Hood
Only). Pull Helmet
down onto Head.
Complete Donning
2. Cup HLF back under
Helmet back; Pull HLF
foreward and down fully
covering Hood Filter.
3.
Optional Filter Fluid Protection
for PB Hoods Only:
Place HFR FCC down onto
Helmet, covering HLF and Filter.
4. Secure all ties.
1. Place inner Shroud inside
body gown (Double Hood
Only).Pull outer Shroud
down fully.
1 Ensure that the DLC Flappers
are in front of the FCC Side Tabs
1 Ensure less than one-half inch
between Eyebrows and Helmet
front bottom so Safety LEDs are
easily seen.
1 Ensure slight tension between
Face and the Cuff, or use SM size.
Doff and Disassembly
Reverse Donning and Assembly steps.
Disconnect Battery from Helmet Power
Cord
Connect the Battery to a Charger.
Ready for Next Use
Dispose of single use items per
institutional protocol for
contaminated waste.
Wipe down all reusable item
surfaces with alcohol based wipes.
2272PB-07 ML and SM
Ties
Lens
Ties
Single Hoods Only
Double Hoods
Filter
Shroud
Filter
Inner Shroud
Outer Shroud
HLF
Heavy Loading Filter
OPTIONAL:
HFR FCC
High Fluid Resistance
Filter Cover Cap
P/N 03523336 Rev B