P/N 07823145 Rev D Page 4
2271PB-07 Hood
Instructions For Use
Doff the Hood, Helmet, Battery and Belt and outer gown
1. Untie both neck and
body Ties, pull through
their loops and discard
appropriately.
7. Connect a powered on Battery
Charger connector to the Battery.
Push connector into Battery recep-
tacle fully - Do NOT push down on
the Battery Secure Lock (Black)
button.
2. Roll up Hood from Shroud back bottom up
and over to top front of Helmet.
4. With Hood com-
pletely off Helmet
discard appropri-
ately.
6. Disconnect the Helmet
Power Cord from the Bat-
tery - Press down on the
Secure Lock (Black) Button
to release, then pull the cord
connector out from the Bat-
tery connection receptacle.
5. Unbuckle Belt and
remove Battery and
Belt from around the
waste.
WARNING
Refer to Section 9,User’s Instructions (/PN 03521015:
Charger, for details on proper use of chargers and for
charging batteries.
3. Unsnap each side Flapper
and continue moving rolled
Hood forward and off front
Helmet Mounting Post.
6. Loosen the rear Headband
Adjustment Knob (turn
counterclockwise).
5. Doff body
gown per gown
manufacturer’s
protocol and
discard appro-
priately.
7. Lift Helmet up and off
head.
