P/N 07823145 Rev D Page 1
2271PB-07 Hood
Instructions For Use
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
System or component, be sure to be
familiar with the system’s NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User’s Instructions should use this product.
Failure to follow the User’s Instructions, these and in the MAXAIR
Systems User’s Instructions, P/N 03521015, may be hazardous to
the user’s health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to regula-
tory requirements. Bio-Medical Devices Intl, Inc. does not recom-
mend the appropriate systems for a particular institution or facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open flame.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
CAUTION
Before use, refer to the CAPR
®
User’s Instructions, P/N 03521015 (received with all CAPR Helmets) for details.
!
Symbol Definitions
Warning, Caution, or Note Order Number
!
!
Intended Use
The MAXAIR
®
CAPR
®
Hood Systems are intended to filter
aerosolized and droplet particulates and provide high level fluid
resistance.
Hoods are designed for single use applications.
Hood Specifications
Temperature Limits:
49
0
C maximum
Materials:
Regulatory
NIOSH
Typical Hood System Components
1 The 2500-30TSC is an alternate to the 2500-37TSC.
MATERIAL
TYPE
FLUID RESISTANCE
Body (Shroud) Polypropylene
ASTM F1671
Lens
Polycarbonate
ASTM F1671
Hood Filter
Polypropylene
AATCC TM127
HLF
Polypropylene/
modacrylic blend
General particle filter
material
O.N.
1. 2081-03 Helmet
2. 2271PB-07 Hood w/2170-27 HLF
3. 2061-05 HFR FCC
4. 2500-37TSC Battery
1
5. 2000-76 Battery Belt
6. 2600-01 Battery Charger
1
2
3
4
5
6
O.N. 2271PB-07SM
(Small-Medium)
P/N 07831155
O.N. 2271PB-07ML
(Medium-Large)
P/N 07831156
*one 2170-27 (07831205) HLF is
included with each Hood
