Max BC-TC-C-WM-4, Operating Manual, Page: 17 / 40

17
Teaching-in
the system and can be configured for each room via
the MAX! software.
As soon as the MAX! Wall The has been
taught-in to the MAX! Cube, all data such as date,
time or week program are transmitted to it via ra-
dio connection.
If you want to add a MAX! Cube to your system sub-
sequently, a factory reset must be performed for
all devices (incl. MAX! Wall The) prior to
teaching-in to a MAX! Cube. All settings including
your weekly profiles are deleted in this process.
MAX! Room solution
In the MAX! Room solution, you can control up to 8
MAX! Radiator Ther and 8 MAX! Window
Sensors via the MAX! Wall The. For this
purpose teach-in the devices directly to the MAX!
Wall The. These then take over the set-
tings of the MAX! Wall The (e.g. mode,
temperature, week program).
To teach in, proceed as follows:
• Put the device to be taught-in (e.g. MAX! Radiator
The) into teach-in mode (according to the
corresponding operating manual).
• Press and hold down the Boost/OK button of the MAX!
Wall The for at least 3 seconds to activate
teach-in mode.