
9
Start-up
3
• Pull the electronic unit (A) forward (4) and off the
bracket.
• After removing the old batteries, please wait approx.
60 seconds.
• Insert two new LR03/micro/AAA batteries in the bat-
tery compartment (making sure that you insert them
the right way round).
• Place the electronic unit (A) back onto the bracket,
allowing it to latch into place.
• Put the cap back to the electronic unit (A). Make sure
that the LED opening on the cover is positioned over
the LED (D) on the electronic unit.
Never recharge standard batteries. Do not throw
the batteries into a fire. Do not expose batteries
to excessive heat. Do not short-circuit batteries.
Doing so will present a risk of explosion.
Summary of Contents for BC-SC-Rd-WM-2
Page 1: ...Window Sensor BC SC Rd WM 2 Operating manual...
Page 23: ...23...