5
23. DEMO SONG
This keyboard has 24 stored demo songs (
“000” to “023”) for your selection. Press [DEMO SONG] and the demo songs
will start to play in order. During playing process, press [DEMO SONG] to play the next demonstration song. Press
[START/STOP] to stop playing. During the playing process, you can also press the num pad buttons or the
“+”/”-” buttons
to select other demonstration songs. The selected demonstration song will then play repeatedly.
24. NUM PAD
Numeric keys to enter an accurate value.
25. PERCUSSIONS
This Keyboard provides 8 kinds of
panel
percussions. Press one of eight to play the corresponding percussion. Percussion
instruments can be added to enhance the atmosphere as required.
26. CHORD ZONE
Chord key zone (1st-19th key from left).
CONNECTIONS
1. AUDIO INPUT
Turn off the keyboard and external audio device of choice. Connect
one end of the audio cable to the INPUT port on the rear panel of
the keyboard, connect the other end to the audio port of the device.
2. MICROPHONE INPUT
Connect a microphone to the MIC port to sing while playing the
keyboard.
3. HEADPHONES/OUTPUT
When connecting headphones to the PHONES/OUTPUT port, the
loudspeaker will be disenabled automatically. You can perform
without disturbing others and other disturbing you.
4. DC 9V INPUT
Socket for plugging in the supplied power adapter.
AUTO RHYTHM
Rhythm selection
This Keyboard provides 255 rhythms (
“000” to “254”) for your selection. The rhythm is defaulted to be “000”. Press [RHYTHM] to
initiate the rhythm selection function. Press the numeric keys
or the “+”/“-” buttons to select other rhythms.
Rhythm control
1. Rhythm enabling
Press [START/STOP] to start accomp rhythm. While in enable state: Press [SYNC
], “SYN” will show on the display. Play any
key in the chord key zone (1st-19th key from left). The accomp rhythm will be activated.
2. Interlude
After the accomp rhythm is activated, press [FILL IN] to have a temporary rhythm play during the accomp rhythm.
3. Stop rhythm
Press [START/STOP] to stop the accomp rhythm.
Tempo adjustment
Press [Tempo +] or [Tempo -] to increase or decrease the tempo. Press the two buttons simultaneously may reset to the default
value of 120 tempo/min.
EFFECT CONTROL
Sustain function
Press [SUSTAIN] and the sustain effect will be activated. Press this button again and the sustain effect will be disenabled.
Vibrato function
Press the [VIBRATO] and the vibrato effect will be activated. Press this button again and the vibrato effect will be disenabled.
RECORDING AND RHYTHM PROGRAMMING
Recording
Press [REC
] to enable the recording function, “REC” will show on the display. In this mode all played notes will be recorded.
When
storage is full, “FUL” will flash on the display and recording will stop automatically. Press [PLAY] to playback the recorded
notes,
“PLA” will show on the screen. On completion of playback, “REC” will show on the display. You can record a new rhythm,
or you can press [PLAY] to playback the recorded rhythm.
Rhythm programming
Press [PROG
] to enable the rhythm programming function, “PRG” will show on the display and the keyboard percussion
function will be activated. 32 Percussions can be programmed at
maximum, after that “FUL” will appear on the display and
programming will stop automatically. Press [PLAY] to playback the programming rhythm. Press [START/STOP] or press
[PROG] again to disenable the programming function. All recorded rhythms will be removed.
Summary of Contents for 130.108
Page 1: ...KB4 Electronic Keyboard 61 key Ref nr 130 108 INSTRUCTION MANUAL V1 0...
Page 8: ...8 APPENDIX I TIMBRE TABLE AND RHYTHM TABLE...
Page 9: ...9...
Page 10: ...10...
