7
© Copyright Century UK Limited 2012 www.centuryuk.com
Plastic Wing Supports (continued)
Install the plastic wing supports in the
lower
wing
panels using the adhesive supplied, (image 17).
Please be aware that these parts are handed and
must be installed correctly.
Note:
Port is the left hand side viewed from the
rear of the model.
Lower Wing
Upper Wing
Install the plastic wing supports in the
upper
wing
panels using the adhesive supplied, (images 18 &
19). Please be aware that these parts are handed
and must be installed correctly.
Note:
Starboard is the right hand side viewed from
the rear of the model.
6. Wing Assembly
Fit the remaining four control horns to the ailerons
using 16 x M2 x 15mm screws, (image 20).
Remember to use the plastic backing plates and
make certain they are securely fixed, (image 21).
Centre the servos, connect the control linkages to
the aileron servos and control horns, (image 22).
Make certain the plastic links are securely
“snapped” closed when connected to the control
horns.
