FOOD PROCESSOR
RATING : 220-240V,50/60 HZ
POWER : 562-800 W
MASTER CHEF
WARRANTY CARD
6
1) Chutney jar
Function:This jar can be used to grind small quantities of jeera, dhania, green chilli, pepper ,Garam
masala, ect.
- Put the ingredients to the ground in the chutney jar .
- Hold the lid and press it down firmly on the chutney jar.
Ensuring that the lid has locked securely from all sides.
- Place the chutney jar on the main unit through the jar base .
- The substance to be ground should not be too large to cut / break ingredients into smaller
pieces.
- Do not add too much water while using this jar.
- Do not run the mixer continuously as it tends to rob the ingredients of their flavor thus
short spurts would be preferable. while dry grinding , friction may heat up the jar ,this is
not abnormal.
2) Wet grinding jar
Function:This jar can be used for grinding items like idli and dosa groundnut, red chilli, sugar,
palak, ect.
- Fill the jar with the ingredients ,up to 2/3 of capacity of the jar and
add some water as per the desired quantity (in case of wet grinding ).
- Put the flat lid on top of the jar and fit it onto the main unit.
- Grind at a low speed for about 15sec.And then move to higher speeds .
- Keep adding water till you achieve desired consistency.
- Always ensure that the lid is in place before starting.
- Don’t add all the water at a time. Instead add it in smaller quantities as and when
required.
- Always move gradually from lower to higher speeds.
Care & cleaning
1. Always switch off and unplug before cleaning.
2. Handle the blades and cutting discs with care – they are extremely sharp.
3. Some foods may discolour the plastic. This is perfectly normal and won’t harm the plastic
or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the
discolouration.
Power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
All other parts
-
Wash by hand, then dry.
-
Alternatively they can be washed on the top rack of your dishwasher. A short low temperature
programme is recommended.
Customer care
If the cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
