3
UNPACKING INSTRUCTION
CAUTION!
Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. If the product must be returned to the factory, it is important that the product is returned in the original factory box and
packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
Supplied contents:
-
MAX Music KB1 keyboard
-
Power supply
-
Music sheet stand
POWERSUPPLY
The label on the bottom of the product indicates to what type of power supply the product must be connected. Check that the
mains voltage corresponds to this, all other voltages may cause irreparable damage. The product must also be directly
connected to the mains, no dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONTROLS
1. SPEAKERS
Loudspeakers to reproduce the sound of the music played. Sound level is determined on the basis of the volume setting.
2. POWER ON/OFF
Switch to turn the keyboard on or off.
3. FINGERED CHORD
In this mode, you play the individual notes of the chord in your left hand. Under the state that the rhythm is activated, press
[Fingered Chord
]. After the “FIN” shows on the display, you can play a fingered chord on the keys in the chord zone of the
keyboard. Pre
ss [Fingered Chord] again, “FIN” will disappear from the display. The fingered chord function will be
disenabled.
4. SINGLE CHORD
Under the state that the rhythm is activated, press [Single Chord]. After
“SIN” shows on the display, you can play a single
chord on the keys in the chord zone of the keyboard. Press [Single Chord
] again, “SIN” will disappear from the display. The
single chord function will be disenabled.
5. RECORD
Press [Record] to enable the recording function, “REC” will show on the display. In this mode all played notes will be
recorded. When
storage is full, “REC” will flash on the display and recording will stop automatically. Press [Play] to
playback the recorded notes,
“PLAY” will show on the screen. On completion of playback, “REC” will show on the display.
You can record a new rhythm, or you can press [Play] to playback the recorded rhythm.
6. START/STOP
Press to start or stop playing selected program.
