10
max
mobility
®
Traveling and Shipping
Because the SmartDrive houses a Lithium-Ion battery, special considerations have to be taken when traveling on an airplane.
The SmartDrive must be carried onto your plane and should be stored in the overhead bin. It is recommended that advanced
arrangements be made with each airline operator and approval received prior to departure date. A “SmartDrive Airline Pas-
senger / IATA Certificate” can be downloaded or provided upon request.
Use the provided foam stand for the SmartDrive to prevent movement and damage when transporting in a car. If riding in
a cab, it is recommended to have the driver hand you the SmartDrive so that it doesn’t get damaged from movement when
placed in the trunk.
Also, special considerations need to be taken when shipping the SmartDrive due to the battery. Contact the shipping com-
pany being used for instructions on how to correctly package and label prior to shipping. Be sure to provide plenty of padding
/ protection for the SmartDrive to prevent damage during shipment.
5. Maintenance
Inspection
Always inspect the SmartDrive, omni-drive wheel, PushTracker, attachment hardware and thumb throttle buttons [if present]
for missing parts / damage prior to each use. Cease use and contact Max Mobility or your mobility equipment dealer if you
notice any of the following:
•
Broken or cracked plastic
•
Any of the rollers do not spin with little resistance, have flats worn in them or any other significant damage
•
Significantly worn down rollers and / or damaged wheel plastic
•
Ripping rubber on the PushTracker
•
Missing or loose screws
•
Adaptive clamp has rotated downward [on rigid wheelchairs]
•
Broken or fraying cables
•
Magnetic receptacle or plug has collected metal shards
•
Any abnormal motor activation / deactivation activity [during use]
Cleaning
Cleaning of the SmartDrive can be done by wiping all of the parts down with a damp wash rag. This should be done at least
once a month, or as needed.
Roller Lubricating or Replacement
Do not throw away the SmartDrive or PushTracker. Please properly dispose of each by recycling
at the end of its life or send it back to Max Mobility.
The omni-drive wheel contains 16 rubber rollers that may wear down, depending on
driving conditions, after extensive use. These rollers are able to be replaced. Also, in
snowy climates, salt may cause corrosion to the bearings on these rollers and affect
their performance. Spraying lubrication on these bearings will increase their usable
lives [see graphic to the right]. Contact your mobility equipment dealer or Max Mo-
bility for information on replacing / maintaining the rollers on your SmartDrive.
Always store and charge the SmartDrive and PushTracker in a cool, dry area. Hot and damp environments can
damage or short the unit, requiring a costly replacement.
Make sure the charging receptacles are completely dry before plugging in the charger, for this can cause a spark or short.
Also, never attempt to use the PushTracker while charging.
