1
max
mobility
®
PushTracker
User’s Manual
2
NOTES:
PushTracker Serial Number:
__________________________
Figures and diagrams of the PushTracker in this manual may vary slightly from
your device.
An electronic version of this User’s Manual along with informational videos are
available on our website [www.max-mobility.com / www.pushtracker.com] for
people with visual, reading or cognitive disabilities.
The Serial Number of your PushTracker is located on the bottom of the
PushTracker housing.
It is recommended that you save this User’s Manual and record the Serial Number
below for reference.
Electromagnetic Interference (EMI)
Refer to the
SmartDrive User’s Manual
for EMI specifications.
USA / Canada
This device complies with Part 15 of the FCC rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference, including interference that may cause un-
desired operation. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Bluetooth® Wireless Communication
Bluetooth® wireless communication [2.4 GHz frequency band] is used by the
PushTracker to communicate to the SmartDrive when to activate/deactivate the
power assist, send and receive signals from a smartphone, etc. The PushTracker
must be within 25 ft (8 meters) of the SmartDrive / smartphone to connect
and communicate. The maximum output power of this technology is 10 mW,
and the operation of this device in close proximity to other wireless devices [i.e.
electromagnetic security systems, Bluetooth® headsets, etc.] could cause the device
to lose connection. Power assist is always deactivated whenever the motor is driving
and there is a loss of connection; the SmartDrive will beep and PushTracker will also
give indication when this happens. Worst case coexistence testing was performed
on the device to ensure its safety and effectiveness. Please contact Max Mobility
immediately for troubleshooting if continuous connection issues are experienced with
the device.
