P/N 03523278 Rev A Page 1
2000-210 4-Point ChinStrap
Instructions For Use
Typical Hard Hat System Components
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replace-
ment or repair.
Prior to using any MAXAIR
®
System or component, be sure to be
familiar with the system’s NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User’s Instructions should use this product.
Failure to follow the User’s Instructions, these and in the MAXAIR
Systems User’s Instructions, P/N 03521015, may be hazardous to
the user’s health.
The institution using this product in any application is responsible
for determining the appropriateness of this equipment relative to
regulatory requirements. Bio-Medical Devices Intl, Inc. does not
recommend the appropriate systems for a particular institution or
facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
CAUTION
Before use, refer to the CAPR
®
User’s Instructions, P/N 03521015 (received with all CAPR Helmets) for System Details.
!
Symbol Definitions
Warning, Caution, or Note
Order Number Part Number
!
O.N.
P/N
!
Intended Use
The MAXAIR Chin Strap is an accessory item for MAXAIR Hard
Hat configurations that enhances Helmet-to-head secureness of
fit. This may be helpful for applications where a worker’s activity or
environmental factors could otherwise dislodge the Hard Hat from
its properly donned position.
For Use With
The Chin Strap may be used with any MAXAIR Hard Hat System
configuration.
1
2
4
3
Specifications
System Temperature Limits: 49
0
C
Materials
Nylon Hooks
Acetal Buckle and Keeper
Polypropylene Strap
Polyester Buckle
Regulatory
NIOSH
ANSI Z87.1
O.N. 2000-210
P/N 03531271
Head/Face Cover Alternates
1. 2061-04A Hard Hat
2. Optional 2400-090L Impact
Lens
3. 2083-03 Helmet with Liner
and Power Cord, and 2167-10
Filter Cartridge
4. 2500-37TSC Battery, 12-15
Hr./Charge
5. 2000-76 Battery Belt
6. 2600-01 Battery Charger
7. 2000-210 4-Point ChinStrap
2264-01 ML & SM
DLC Shroud
2366-01 ML & SM
DLC Lens-Cuff
NOTE
The 2500-36TSC, 8-10 Hr./Charge is an alternate
battery.
The 2166-10 N-OV is an alternate Filter Cartridge.
!
7
6
5
Long, Rear
Rivet Straps
Short, Front
Rivet Straps
Front Strap on
Front Rivet
Rear Strap on
Rear Rivet
