Maverick Campers Operations Manual 2021
S E T T I N G U P Y O U R T R A I L E R
Due to the uniqueness of the models, this section is split into separate sections for camper trailers and hybrids. Refer to
the contents page or skip to the page that mentions your particular model.
CAMPER TRAILER SET UP PROCESS
Step 1: Lower the stabilizer legs
Included with your Maverick Camper Trailer is a winder for manually winding down your stabilizer legs. All trailers
except for the Hornet V2 have a stabilizer leg on each of the 4 corners. The Hornet V2 only requires two at the rear of
the trailer.
To lower and set you stabilisers legs undertaking the following process
-
Pull the blue handle of the stabiliser leg to unlock the leg
-
Be careful as the leg will swing once unlocked
-
Push the blue handle once the stabiliser leg is in the downward position
-
Please not on uneven surfaces you stabiliser leg may not be vertical but slight off vertical to accommodate the
uneven terrain
-
Commence winding the stabiliser down using the winder provided
-
Ensure that the stabiliser is firmly touching the ground to prevent movement when inside the trailer but not so
firm that it puts the stabilser at risk of breaking or failing
-
Repeat this process on the remaining stabilser legs
-
If you still feel bounce when moving around the camper trailer, try to identify which stabiliser leg is not firmly
touching the ground and extend until the bounce goes away
Step 2: Unlatch and fold over the boat rack
Almost all of our camper trailers have a boat rack installed. This is a valuable addition to your camper and acts as a
storage device for swags, camping gear, as a bike rack (with the appropriate rack installed), boat rack, kayak rack or just
about anything else you can fit securely onto it. Its rated to 100kg which gives you ample storage options.
