MAULE AEROSPACE TECHNOLOGY, INC.
MAINTENANCE MANUAL
FOR
M-7-235C
Rev. D
28/37
4. Carefully slide the fork spindle through the friction ring and bearings until the friction
washer is bottomed against the springs. Make sure that all parts stay in place.
5. Assemble lock ring (73B), arm (6) (with lock pin (13AB) and spring (14) installed),
shield (36), and pins (60AB) together as a unit. Make sure that the key end of lock pin
13AB) is properly aligned with the slot in lock ring (73B).
6. Slide the lock pin subassembly over the threaded end of the fork spindle being careful
to keep the parts together. It will be necessary to retract lock pin (13AB) slightly to
clear wear plate (75B) as the assemblies are brought together.
FIGURE 1
