Matter Surfaces | +1 212 252 2049 | [email protected] | mattersurfaces.com
Mechanical Cleaning:
The Orbital Method
1. Start by vacuum cleaning.
2. Use an Orbot machine with soft
SuperZorb pads and luke warm water or
ultra-pure water if possible. If needed
in more heavily soiled areas, spray the
floor directly with a minimal amount of
an all-purpose cleaner with a pH of 7–8.
IMPORTANT! Never use a well-worn or
broken SuperZorb pad.
3. Before starting the machine, make sure
that the SuperZorb pads are moist. Dry
SuperZorb could potentially damage
the flooring.
4. For easier handling, remove the weights
from the machine.
5. Run the machine slowly back and forth
with uniform overlapping while “spray-
damping” the floor. The dirt is absorbed
in the pad. Replace the SuperZorb pad
when it becomes too dirty or wet.
6. Do not leave a dirty SuperZorb pad to dry
by itself before washing. The SuperZorb
pads should preferably be tumble-dried.