2.
Slide Power Pack into back of vehicle up to the spring loaded
contacts. Push in while turning Power Pack Release Latch up
(or counter-clockwise) to lock Power Pack in place.
3.
To remove Power Pack, turn Power Pack Release Latch
down (or clockwise). Slide out Power Pack.
BATTERY INSTALLATION
4.
Slide battery door open. Install one 9-volt
battery, with polarity (+/-) as shown inside
battery compartment.
5.
Replace battery door.
BATTERY INSTALLATION
(Batteries not included)
IMPORTANT BATTERY
INFORMATION
006P
9V
OPEN
Metal Contact
■
Do not mix old and new batteries.
■
Do not mix alkaline, standard
(carbon-zinc), or rechargeable (nickel-cadmium) batteries.
■
Remove batteries if vehicle will not be used for a long
period of time.
■
For best performance, we recommend alkaline batteries.
■
Do not recharge non-rechargeable batteries.
Battery Contacts
■
Bent or dirty contacts may result in loss of power.
■
If battery does not fit correctly,
gently bend back metal contact as shown in diagram.
IMPORTANT BATTERY
INFORMATION
TRANSMITTER
1.
Lift tab on bottom side to open Power Pack cover and
insert 5 “AA” batteries, with polarity (+/-) as shown
inside Power Pack.
VEHICLE
