G.
Indicate the type of
surface on which you will
operate the truck. Choose
“carpet” or “smooth floor”.
™
Map
’
n Go!
™
Fire Truck
Keep these instructions; they contain important information.
A
B
C
E
P U S H F I R M LY
®
95108-0920
To Install Batteries:
Insert 4 new C-size (LR14)
alkaline batteries as shown in
steps [
A
], [
B
], [
C
], [
D
], and [
E
]
ON/
OFF
F
Carpet
Smooth Floor
1cm / 1⁄2 in.
H
Operation:
F.
Turn the truck on.
D
G
INSTRUCTIONS
Philips head screwdriver
required - not included.
H.
Gently lift the frame sur-
rounding the electronic
pad. (The rear of the frame
rises only about 1⁄2 inch / 1
centimeter). Remove the
protective tissue and
release the frame.
IMPORTANT: Always lift and
release the frame after turn-
ing the truck on. Otherwise,
the truck will not operate.
IMPORTANT: This product is
not recommended for use on
loose dirt or wet surfaces.
Do not immerse in water.
