Single Phase
EV Charger Protection unit
4 |
P a g e
Introduction
The
matt
:
e
of range Single Phase Electric Vehicle Charger Protection units
are designed to protect Electric Vehicle Charging equipment when installed
onto single phase PME infrastructures .
All units incorporate an electronic detection circuit and 3 pole contactor. The
R version has a Type A RCBO on the incoming side of the unit.
On detection of fault conditions the electronic circuit disconnects the EV
charger from the incoming supply including CPC. The isolation contactor is
certified to BSEN 60947 and complies with the requirements of BS: 7671 18th
Edition.
The
matt
:
e
SP-EVCP technology does not require earth rods or measuring
electrodes to function correctly.
The unit is designed to be installed between the distribution board and the
Electric Vehicle Charger.
The installation location should be clean, dry and well ventilated.
matt
:
e
no longer use plastic bags as part of our product packaging.
Wherever possible we utilise reusable biodegradable packaging for
transportation. We ask that you support our efforts to reduce un-necessary
waste and recycle all packaging appropriately. Thank you.
