Select the desired setting menu, and perform the corresponding settings.
1.
Use the TRANSPOSE/PROGRAM buttons to
select the part you wish to set.
•
PT is the abbreviation for part and ACP for
ACCOMP.
2.
Use the TEMPO/PROGRAM buttons to adjust
the volume (0 to 127).
•
Repeat these steps for each part as necessa-
ry.
1.
Use the TRANSPOSE/PROGRAM buttons to
select the part you wish to set.
2.
Use the TEMPO/PROGRAM buttons or the
number buttons to select a sound for the part.
1.
Use the TRANSPOSE/PROGRAM buttons to
select the part you wish to set.
2.
Use the TEMPO/PROGRAM buttons to adjust
the stereo midpoint (0 to 127).
•
At 0 the center is all the way to the left, at 64
the center is midway between right and left,
and at 127 the center is all the way to the right.
1.
Use the TRANSPOSE/PROGRAM buttons to
select the part you wish to set.
2.
Use the TEMPO/PROGRAM buttons to set the
channel (OFF, 01 to 16).
1.
Use the TEMPO/PROGRAM buttons to select
the part you wish to set.
2.
Use the TRANSPOSE/PROGRAM buttons to
set the LOCAL CONTROL setting (ON or
OFF).
•
When set to OFF, the performance for the part
is transmitted as MIDI data but does not sound
from this instrument.
Use the TRANSPOSE/PROGRAM buttons to
select the MIDI CLOCK mode.
INT: This instrument's internal clock is used
to control the connected MIDI equipment.
EXT: The clock of the connected MIDI equip-
ment is used to control this instrument. (The
tempo is displayed as
=
.)
•
For information about MIDI connections, refer
to page 31.
•
The setting is always set to INT when the
power to this instrument is turned on.
MENU
MENU
MENU
MENU
MENU
MENU
---
"
"
Summary of Contents for SX-KC211
