Introducing Your New Table Top Fridge Install Your New Table Top Fridge
Location
When selecting a position to place your Appliance you should make sure that the floor
is flat and firm, and the room well ventilated. Avoid locating your Appliance near a
heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight in outbuildings or sun
lounges. It must therefore be installed so that the Appliance has at least 10cm (2 1/2")
of free space and the sides have 2cm (3/4"). The Table Top Fridge door can either open to
the right or the left, depending on whichever suits you. See page 5 if you want to reverse the
door swing. Do not drape your Appliance with any covering.
Levelling the Table Top Fridge
Remove the packaging support from the base of the Appliance
and replace with the 2 Levelling Feet. Make sure the Appliance
is level. Use the Levelling Feet at the front. If the Appliance is not
level, the doors and magnetic seal alignments will be affected.
Cleaning before use
Wipe the inside of the Appliance with a weak solution of bicarbonate soda. Then rinse
with warm water using a damp sponge or cloth. Wash the baskets and shelves in warm
soapy water and dry completely before replacing in the Fridge. The external parts of the
Fridge can be cleaned with wax polish. If you require more information refer to Cleaning on
page 4.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the Appliance.
If not, see the section called ELECTRICAL CONNECTIONS on page 7.
Before switching on!
DO NOT SWITCH ON UNTIL TWO HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle.
Please Note:
The Ice Box compartment is for ice only and not for freezing food.
Before use
Please read these instructions carefully before using your new Matsui Appliance
. The Appliance is for indoor, domestic use only.
2
Ice box
Levelling feet
Adjustable shelves
Ice tray
Bottle storage
Drip tray
Thermostat
control dial