11
GB
3. Align the REAR GUARD with the slot
on the MOTOR and push until secured.
4. Secure the REAR GUARD to the
MOTOR HOUSING using the GUARD
LOCK NUT.
5. Thread the BLADE onto the MOTOR
SHAFT. Ensure the slot in the BLADE
matches up with the notch on the
MOTOR SHAFT.
6. Secure the BLADE by screwing the
BLADE CAP onto the end of the
MOTOR SHAFT. The BLADE CAP turns
anti-clockwise to tighten.
1. Fit the neck of the fan into the BASE.
Push firmly until the neck clicks into
place.
2. Unscrew the BLADE CAP and GUARD
LOCK NUT.
MF303W_IB_5L_RC_151228_grace.indd 11
28/12/15 6:31 pm
