19
GB
3. Select the cooking zone you would like to use.
If you don’t choose a heat setting within 1 minute, the
ceramic hob will automatically switch back to standby
mode. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
Using Your Ceramic Hob
To Start Cooking
1. Touch the
ON/OFF
control.
After turning on, you will hear a tone. All the indicators light
up for 1 minute then go out, indicating that the ceramic
hob has entered standby mode.
2. Place a suitable pan on the cooking zone that you wish to
use.
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Do not place hot pans over the control panel
as this may cause damage.
4. Touch the
or
controls to
select the power level. The power level
will default to level 5.
•
Level 5 (Default)
•
Level 0 (Off)
•
Level 9 (Max power)
MCHOBTC13N_IB_130426_Shaun.indb 19
26/04/2013 3:40 PM