7
Hob with touch controls
Using the elements
1
Switch the hob on by touching .
2
Touch the button corresponding to the element you wish to cook on.
3
A red dot will appear beside the button that is selected. (If no element
is selected within 10 seconds the hob will automatically turn off).
4
Select the element temperature setting, using the or as required. The
element is now ready to cook on. For quickest boil times, select 9 and then
adjust down to a lower setting as required (1-9 will be displayed next to the
element selector).
Heat boost
All heaters are equipped with a heat boost function. If the heat boost is active, then
the heater will be operated with maximum power for a set period of time depending
on the selected heat setting. This is indicated through a flashing '
A
' alternating with
the temperature setting level. The higher the setting the longer the heat boost. Once
the heat boost time ends only the heat setting will be indicated and the element will
cycle 'on' and 'off'.
To activate the heat boost, touch the button corresponding to the element you wish
to cook on, then by pressing ' ' , the heat boost is active. Duration of the heat
boost depends on the temperature setting level , select level 9 to 1 with heat boost.
The heat boost can be turned off by pressing ' ' until the heat setting '
0
' appears
or by pressing ' ' until heat setting '
9
' appears.
Hot hob warning indicators
When a hot hob warning indicator light is displaying
H
, it is indicating the cooking
zone has some residual heat and will require the minimum amount of energy to
reheat to cooking temperature.
The indicator should NOT be seen that it is safe to touch the cooking zones if the
light is not lit. Care must ALWAYS be taken before touching any cooking appliance.
instructions for use MCE61TC
All manuals and user guides at all-guides.com
