Sa
tet
y
W
ar
nings
Oper
ation
Cleaning
and
M
ain
tenanc
e
Specifica
tion
Bef
or
e
U
se
GB-4
Install Your New Fridge Freezer
Location
When selecting a position to place your appliance you should make sure that the floor is flat and firm, and the room
well ventilated. Avoid localing your appliance near a heat source, e.g. Cooker, boiler or radiator. Also avoid direct
sunlight in outbuildings or sun lounges. It must therefore be installed so that the appliance has at least 10cm
( 1/” )of free space and the sides have cm (/4” ). The appliance door can either open to the right or the left,
depending on whichever suits you. See page 5 if you want to reverse the door swing. Do not drape your appliance
with any covering.
Moving the Appliance
Your Fridge Freezer has two wheels at the rear. The easiest way to move the Fridge Freezer is to tip it backwards just
far enough to lift the front feet off the ground and roll it into position.
Levelling the Fridge Freezer
Remove the packaging support from the base of the appliance and replace with
the Levelling Feet. Make sure the appliance is level. Use the Levelling Feet
at the front. If the appliance is not level, the doors and magnetic seal
alignments will be affected.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate soda. Then rinse with warm water using a
damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry completely before replacing in
the Fridge. The external parts of the Fridge can be cleaned with wax polish. If you require more information refer to
Cleaning on page 9.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the appliance.
Before switching on!
DO NOT SWITCH ON UNTIL TWO HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle.
Please Note: The Ice cube tray is for ice only and not for freezing food.
M170SF09_IB_GB_FINAL_090806.indd4 4
06/08/09 3:41:09 PM
