43
Video (EGA/VGA)
This item defines the video mode of the system. This main-
board has a built-in VGA graphics system; you must leave this
item at the default value.
Halt On (All Errors)
This item defines the operation of the system POST (Power
On Self Test) routine. You can use this item to select which
types of errors in the POST are sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start
up time. These are display-only fields. You cannot make
changes to these fields.
Advanced BIOS Setup Option
This option displays advanced information about your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Advanced BIOS Features
Item Help
Anti-virus Protection
[Disabled]
CPU L1 & L2 Cache
[Enabled]
Quick Power On Self Test
[Enabled]
First Boot Device
[Floppy]
Second Boot Device
[HDD-0]
Third Boot Device
[LS120]
Boot Other Device
[Enabled]
Swap Floppy Drive
[Disabled]
Boot Up Floppy Seek
[Enabled]
Boot Up NumLock Status
[On]
Gate A20 Option
[Fast]
Typematic Rate Setting
[Disabled]
x Typematic Rate (Chars/Sec)
6
x Typematic Delay (Msec)
250
Security Option
[Setup]
APIC Mode
[Enabled]
OS Select For DRAM > 64MB
[Non-OS2]
HDD S.M.A.R.T Capability
[Disabled]
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
↑↑↑↑
↓↓↓↓
→
→
→
→
←
←
←
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
