2: Mainboard Installation
11
Wake On Modem (JWOM1)
You can configure your system to be powered down by software
and resumed by alarms. If you have installed a fax/modem card,
connect the fax/modem to the Wake On Modem header JWOM1.
You can use the setup utility to program your computer to resume
from a power saving mode whenever there is an incoming call to
the fax/modem.
Wake On LAN (JWOL1)
If you have installed a LAN adapter expansion card, connect the
card to the Wake On LAN connector JWOL1. This allows
incoming traffic to resume the system from a software power down.
You need to enable this feature in the system setup utility.
JWOM1
Header
JWOL1
Header
