BIOS Setup
35
Peripheral Setup
Choose the item from the BIOS Setup main menu.
OnBoard FDC Enabled
OnBoard Serial Port1 3F8h/COM1
OnBoard Serial Port2 2F8h/COM2
Serial Port2 Mode Normal
Ir Duplex Mode Full
OnBoard Parallel Port 378h
Parallel Port Mode Normal
Parallel Port IRQ 7
Parallel Port DMA N/A
OnBoard IDE Both
ESC : Quit
↑ ↓ → ←
: Select Item
F1 : Help PU/PD/+/– : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
AMIBIOS SETUP - PERIPHERAL SETUP
(C)1998 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
This option enables the FDC (Floppy Drive
Controller) on the motherboard or auto detects
the FDC.
OnBoard Serial
Port1
This option specifies the base I/O port address
of serial port 1.
OnBoard Serial
Port2
This option specifies the base I/O port address
of serial port 2.
Serial Port2
Mode
This option specifies the serial port2 mode.
Normal: The normal serial port mode is being
used.
IrDA/ASKIR: The serial port2 will be redirected
to support IR function when this
option is set to IrDA or ASKIR.
IR Duplex Mode
This option is to specify the Duplex mode of
Serial Port 2.
OnBoard Parallel
Port
This option specifies the base I/O port address
of the parallel port on the motherboard.
Summary of Contents for MS6380SG
Page 4: ......
