background image

Warranty

12

MA3400 |  20150825

Warranty Against Defects Procedure

Matson Group Pty Ltd

100 Links Rd, St Marys, NSW 2760

Phone: 02 98333444

Email: [email protected] www.matson.com.au

Warranty

Matson warrants its products to be free of defects for reasonable consumer use for a period of 12 months.
Matson will repair or replace the warranted product and it will return the repaired products under warranty
to the consumer at Matson

s cost.

To make a claim under this warranty, the consumer

must:

Advise Matson of the defect as soon as it becomes apparent within 12 months of the purchase date

and obtain a return authority by phoning Matson on the above number

Provide satisfactory proof of purchase; and

Send the faulty item to the address supplied above. All expenses related to sending the products back

to Matson are at the consumer

s cost.

Exclusions from Warranty

This warranty does not apply to products where:

There is evidence of Improper maintenance or abuse to the products

The products have been exposed to harsh environmental conditions or those outside the specified

operating conditions

Unauthorised modification is evident to the products or misuse of products

Operation outside the products specification.

Warranty Disclaimers

Matson

s liability in respect of a breach of a consumer guarantee or any warranty made under these

warranty terms and conditions for any products not of a kind ordinarily acquired for personal, domestic
or household use is limited, in relation to the products to the extent permissible by law and at it

s option

to:

Replacing the products or the supply of equivalent goods

The repair of the products

The payment of the cost of replacing the products or of acquiring equivalent goods; or

The payment of the cost of having the products repaired.

To the extent permitted by law, all other warranties whether implied or otherwise, not set out in these
warranty terms and conditions are excluded and we are not liable in contract, tort (including, without
limitation, negligence or breach of statutory duty) or otherwise to compensate the customer for:

Any increased costs or expenses

Any loss of profit, revenue, business, contracts or anticipated savings

Any loss or expense resulting from a claim by a third party; or

Any special, indirect or consequential loss or damage of any nature whatsoever caused by Matson

s

failure in complying with its obligations.

MATSON IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A RESULT OF YOUR
FAILURE TO FOLLOW THE INSTRUCTIONS INTENDED FOR THE MATSON PRODUCT

In the following paragraph,

“Our”

means Matson and

Y

ou”

means the customer:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

Summary of Contents for MA3400















Reviews: