background image

1

MA21DCS

20AMP

CHARGER

20AMP

 DC-DC

WITH SOLAR INPUT

   Heavy duty aluminium case and mounting 

brackets

   Encapsulated and sealed to IP65 for under 

bonnet applications

   Microchip monitoring and control
   Fully automatic high frequency multi  

stage charging

   Pulse mode technology that reduces 

oxidation, evens electrolyte consistency and 

minimises temperature equating to longer 

battery life

   Easy push button chemistry selection: Lead 

Acid/AGM (including VRLA and conventional 

flooded batteries), Gel, Calcium and LiON 

(LiFePO4)

   Internal charger temperature monitoring  

and power output control

   LED indicators showing stage of charge
   Over charging, short circuit and over 

temperature protection

   Reverse polarity protection:

1. Input reverse polarity protection
2. Output reverse polarity protection

   Thermal overload protection
   Solar input overload protection
   Power cut memory function: once selected, 

the charger will remain on this battery type 

until it is changed

USER

 MANUAL

This MA21DCS charger is a sophisticated multi stage charger, utilising switch mode and 

fully automatic computerised control, designed to charge most 12 Volt AGM/Lead Acid, Gel, 

Calcium and LiON.

Summary of Contents for MA21DCS









Reviews: