manualshive.com logo in svg

Matrox Monarch EDGE Series, Installation And User Manual, Page: 26 / 78

Share
Download
Matrox Monarch EDGE Series Installation And User Manual Download Page 26

CHAPTER

This chapter includes the following topics:

|   15   |

Part # V11470-301-0101

Last updated: July 27, 2020

4

Network management

•

About Matrox Monarch EDGE device discovery

•

Assigning a static IP address to a Monarch EDGE

•

Monarch EDGE firewall requirements

About Matrox Monarch EDGE device discovery

Matrox Monarch EDGE Control Hub automatically detects and adds new devices to your Mon-
arch EDGE environment. If devices aren’t detected, Control Hub can scan one or more specific 
IP addresses or a range of IP addresses for Monarch EDGE devices.

Discovering devices automatically

After you install and run Monarch EDGE Control Hub for the first time, it automatically 
detects all the Monarch EDGE devices on the same subnet as your controller system through 
the UPnP (Universal Plug and Play) protocol.

Monarch EDGE Control Hub continually scans for devices whenever it is open. If a new device 
appears on the network, it will be displayed in Monarch EDGE Control Hub, but it may not yet 
be assigned to an environment by an environment administrator. 

Discovering devices manually

If Monarch EDGE Control Hub doesn’t automatically detect the Monarch EDGE devices on the 
same subnet as your controller system, you can add them to your environment manually.

Summary of Contents for Monarch EDGE Series















































































Reviews:

No comments