Matrox Maevex 5150, User Manual

Page: 37 / 56

Matrox Maevex Series – User Guide 37
Maevex devices
The following are the requirements for a network firewall present on a network with a Maevex
environment.
Accessing your Windows Firewall settings
To access your Windows Firewall settings:
Windows 10/8.1/7 –
1 Windows 10 – Click
Start
Æ
Settings
Æ
Network & Internet
Æ
Ethernet
Æ
Windows
Firewall
.
Windows 8.1 – From the
Start
screen, go to
All Apps
Æ
Windows System
Æ
Control Panel
Æ
Network and Internet
* Æ
Network and Sharing Center
*. (* Depending on your
configuration, these steps may be unnecessary.)
Network Port Type Inbound Outbound Functionality
20,21 TCP
9
— FTP : File upload
22
*
* Minimum requirements.
TCP
9 9
SSH : Firmware update
69 UDP —
9
DHCP : DHCP client
123 UDP
9 9
NTP : Network Time Protocol
161 UDP
9 9
SNMP : Network management (public
community string)
443
*
TCP
9
—
HTTPS : PowerStream commands and
Firmware Updater Authentication
1900
*
UDP
9 9
UPnP : Microsoft SSDP for discovery of
UPnP devices
Ephemeral
*
UDP
9 9
RTP/RTCP : Audio and video streams
and control
8554 (Maevex
5150), 3049
(Maevex 6100)
*
TCP
9 9
RTSP : Streaming (configurable)
12000
†
† Fixed value when using the
Relayed serial over IP
feature in PowerStream Plus. User defined when using the
Direct
serial over IP
feature in PowerStream Plus.
TCP
9 9
RS232 : RS232 virtualization
‡
‡ Maevex 5150 encoder and 5150 decoder only.
Note: You may need administrator rights to modify your Windows Firewall settings. For
more information, see Windows documentation or contact your system administrator.