16
Matrox G200 MMS – User Guide
Windows 98/Me/2000/XP –
If you have a Plug-and-Play (DDC) monitor, Windows should
automatically use correct settings for your monitor. To make sure the correct monitor is
selected in Windows:
1
Right-click your Windows desktop background, then click
Properties
"
Settings
"
Advanced
"
Monitor
. If you’re using a multi-display desktop (
), select a display before clicking
Advanced
.
2
If the monitor name listed doesn’t match your monitor, click the
Change
button to select
a new monitor name. Follow the on-screen instructions.
3
If you’re using a multi-display desktop (
see “Multi-display setup”, page 17
), repeat steps
for each display in your Windows desktop.
For more information on Windows monitor settings, see Windows documentation.
If you want to customize your Windows monitor settings:
1
Access the PowerDesk
Monitor Settings
property sheet (
).
2
Depending on what you want to do, click one of the buttons in the
Monitor settings
selection method
box, then follow the on-screen instructions.
Windows NT 4.0 –
1
Access the PowerDesk
Monitor
property sheet (
see “Accessing PowerDesk property
).
2
If you have a Plug-and-Play monitor:
Make sure the
Plug-and-Play (DDC) monitor
button is
selected. If so, the Matrox display driver
automatically
uses correct settings for your
monitor. If not, click this button, then click
Apply
.
If you don’t have a Plug-and-Play monitor:
See if the
Default monitor (60 Hz)
button is selected. If
so, use the Matrox monitor selection method. For more information on Matrox monitor
selection, see Matrox PowerDesk online documentation.
3
If you’re using a multi-display desktop (
see “Multi-display setup”, page 17
), repeat steps
for each display in your Windows desktop.
