Matrox Extio 3 Series – User Guide
71
Accessing the OSD (On-Screen Display)
The OSD is available only with Extio 3 receiver devices. To access the OSD, enter the OSD keyboard
shortcut on the keyboard connected to your receiver. The default keyboard shortcut is the [Scroll
Lock] key.
Changing the OSD keyboard shortcut
You can change the keyboard shortcut used to access the OSD. To change the keyboard shortcut, use
the
OSD settings
option.
Using the OSD (On-Screen Display)
Enabling point-to-point mode
To use your devices in point-to-point mode, click
Point-to-Point
from the OSD startup screen. Wait
for the mode to be enabled. For more information,
see “Basic functions”, page 71
Basic functions
Note:
To change the operation mode of your Extio 3 configuration (for example, changing
from networked mode to point-to-point mode), you need to perform a configuration reset
of your devices. For more information,
see “Changing the operation mode of your devices”,
.
Wake up transmitter
Click this to wake up your transmitter if it turns off.
Refresh connection
Click this if the connection between your receiver and
transmitter devices is lost. Wait while your connection is
refreshed.
Close
Click this to close the OSD.
