Matrox DigiSuite LX MAX, User & Installation Manual

Page: 76 / 160

64
Chapter 6, Installing the DigiSuite LX MAX Software
¬ To install Video Clipboard for DigiSuite:
1
Close all Windows programs.
2 Insert your DigiSuite CD in your CD-ROM drive, or if your CD is
already inserted, double-click
My Computer , then double-click
Compact Disc .
3 From the DigiSuite CD menu, choose Install Video Clipboard for
DigiSuite LX .
4 Follow the instructions that appear on the screen. An information box
indicates when the installation is complete.
5 You must restart your computer in order for the changes to take effect.
To do so, click
OK when prompted.
For instructions on how to use Video Clipboard for DigiSuite, refer to the
online Help included with the program.
Installing the VFW software codecs for use on a system
without the DigiSuite hardware
The Matrox VFW software codecs let you render (compile) and play back
DigiSuite-compatible
.avi files in your Video for Windows programs
without having the DigiSuite hardware installed in your computer.
¬
To install the Matrox VFW codecs:
1 Close all Windows programs.
2 Insert your DigiSuite CD in your CD-ROM drive, or if your CD is
already inserted, double-click
My Computer , then double-click
Compact Disc .
3 From the DigiSuite CD menu, choose Install the VFW software
codecs on a system without the DigiSuite hardware .
4 Follow the instructions that appear on the screen. An information box
indicates when the installation is complete.
°Important To capture material, your system must be equipped with
DigiSuite LX MAX or other DigiSuite hardware. If you later decide to add
the DigiSuite hardware to your computer, you must remove the Matrox
VFW software codecs from your system (using
Add/Remove Programs
in
Windows Control Panel) before running DigiUtils Setup to install the
DigiUtils software.