![background image](http://html1.mh-extra.com/html/matrox/digisuite-lx-max/digisuite-lx-max_user-and-installation-manual_1741558051.webp)
39
DigiSuite LX MAX audio cables
use. In addition, each 600 OHM switch provides termination on the XLR
jack located directly above it.
Analog audio output
DigiConnect/Audio supports balanced output signals only. If you’re using
unbalanced equipment, you’ll need to insert the supplied XLR-to-RCA
adapters in the analog output jacks of your breakout box before connecting
your unbalanced cables.
Digital audio input/output
The DigiConnect/Audio breakout box provides two stereo AES/EBU input
and output connections for use with the optional digital module.
DigiSuite LX MAX audio cables
The following illustrations show the DigiSuite LX MAX XLR, RCA, and
digital audio cables.
XLR audio cable
BAL
ON
UNBAL
OFF
600
OHM
Audio
cable
connector
Top of DigiSuite LX
Bottom
IN 1
IN 2
IN 3
IN 4
OUT 1
OUT 2
OUT 3
OUT 4
Summary of Contents for DigiSuite LX MAX
