Matrox 4Sight EV6, Installation And Hardware Reference

Page: 49 / 116

Light emitting diodes (LEDs) 49
Front panel LEDs
On the front panel, there are two network LEDs for each of the Gigabit Ethernet
ports:
Gigabit Ethernet port
LEDs
• Gigabit LED (orange/green). The Gigabit LED turns orange when the port is
using the 1000 BaseT Ethernet network connection, and the LED turns green
when the port is using the 100 BaseT Ethernet network connection.
This LED shuts off when the port is not using the 1000 or the 100 BaseT
connection. When this LED is off, it indicates that the unit is using the 10 BaseT
connection,
but only if the activity/link LED is yellow.
• Activity/link LED (yellow). The activity/link LED for the Gigabit Ethernet port
turns yellow when the port is connected to a network, and blinks during data
transfers. This LED shuts off when there is no activity present.
Back panel LEDs
On the back panel, there are two LEDs:
• Power LED. The power LED is on when Matrox 4Sight EV6 is receiving power
and turned on.
• HDD LED. The mass storage LED turns green when any of the attached SSDs
or HDDs are working (for example, reading or writing).