2 |
P a g e
5x Console Set-Up
Must have Multi-Media Overlay and Earphone board installed
1.
On the Treadmill overlay press and hold
‘Elevation Down’ and ‘Speed Down’
and
on all other console overlays press and hold
‘Level Down’ and ‘Level Up’
to log into
the Manager Mode. Press ‘Enter’ once Manager Mode appears in the LED window.
2.
Using the ‘Level’ or ‘Speed’ buttons, scroll through until you see ‘Software’. Press
‘Enter’.
3.
Use the chart on Page 4 to find your console minimum software requirement.
c.
If your console is not meeting these requirements, contact Matrix CTS with
the frame and console serial numbers along with what the current software
is. They will supply you with new software.
4.
Press ‘View’ or ‘Back’ button twice on the keypad. Once you see Manager Mode in
the LED window, use the ‘Level’ or ‘Speed” buttons to scroll until you see
Engineering and press ‘Enter’.
5.
Using the ‘Level’ or ‘Speed’ buttons, scroll through until you see ‘Audio Source’.
Press ‘Enter’.
6.
Using the ‘Level’ or ‘Speed’ buttons, scroll through until you see ‘Remote TV’. Press
‘Enter’ to save.
7.
Press and hold ‘Pause’ on Treadmills, or press and hold ‘Stop’ on all other consoles
to exit.
8.
From the frame power socket, recycle the power on the unit.