Matrix SETU VG Series, Quick Start Manual

Page: 8 / 24

2 Matrix SETU VG Quick Start
Ports and Connectors
LEDs
SETU VG has a Power LED (PWR) , a Status LED (STS) and eight Port LEDs . By default,
• In SETU VG8, the Port LEDs M1 to M8 are assigned to Mobile Port 1 to Mobile Port 8
respectively.
• In SETU VG4, the Port LEDs M1 to M4 are assigned to Mobile Port 1 to Mobile Port 4
respectively. The LEDs M5 to M8 cannot be assigned to any port.
The LEDs indicate the status of the ports and various events occurring on the ports,
including errors
.
If required, to each port LED—M1 to M8 in SETU VG8 and M1 to M4 in SETU VG4—you may re-
assign a port of your choice. To know more, see
Port LED topic under Maintenance in the System
Manual.
SETU VG is easy to install and operate. The built-in web server, Jeeves , allows you to configure
the system parameters and features On-site as well as from a remote location.
Port Connector Description
SMA (Male) To connect Antenna for the Mobile Ports.
SIM Card Slots
(SIM1 to SIM8)
---
To connect to GSM/UMTS network
a
.
a. When the 3G module is installed in the system, you must disable Call Waiting on the SIM before insert-
ing it into the system to prevent current calls from being disconnected.
Reset Button --- To restart the system or to restore the default LAN IP Address.
WAN Port RJ45
To connect to the IP network over a DSL Modem or Router or a
LAN Switch.
LAN Port RJ45 To connect a computer or a LAN Switch.
12VDC-2A DC Jack To connect 12VDC, 2A Power Adapter.