Omni-Flow 380
5.4 Set Batch
Press “M” to enter Set Batch interface. We can set the batch quantity. Shown in the
following pictures. After confirming, it will enter the standby interface. Then we can
set the sheet quantity for each batch. For example, we set 3 batches and 2 sheets for
each batch on the machine. And then the machine will stop when it finishes running
3 batches and 2 sheets for each batch.
Notes
：
When the sheet quantity is less than the setting, the machine will stop. Then
after we place more sheets on the table, it will continue the last job.
5.5 Set Batch Pause
Press “M” to enter the set batch pause interface. In this interface, we can set the
batch delay time. It can be set from 1s to 99s.
5.6 Set Feed Pause
Press “M” to enter the interface. We can set the delay time between each sheet fed
into the machine. It can be set from 0 to 9s.
5.7 Check Speed
Press “M” to enter the interface. Then press the green start button. It will show the
current running speed. We can use the speed adjusting knob to change the speed.
Press red stop button can stop the test. Then press the stop button again to enter the
standby interface.
16
