Matrix NAVAN CNX200, System Manual

Page: 174 / 1388

164 Matrix NAVAN CNX200 System Manual
Creating VPN Clients on the remote sites using
Windows OS
On remote sites, the VPN Clients may be using Windows XP or Windows 7 as their Operating Systems.
Before you start with the set-up, decide the type of security protocol you want; PPTP or L2TP over IPSec or IPSec
or Open SSL depending on the level of security you require.
Creating a new VPN Connection in Windows XP
The following VPN Clients can be created:
• PPTP VPN Client . See “Creating a PPTP VPN Client” for details.
• L2TP over IPSec VPN Client . See “Creating a L2TP over IPSec Client” for details .
• Open VPN SSL Client . See “Creating an Open VPN SSL Client” for details.
• IPSec VPN Client . See “Creating an IPSec VPN Client” for details.
Creating a PPTP VPN Client
In Windows XP, PPTP VPN connections are created using the New Connection Wizard . To set up a PPTP VPN
connection, follow this procedure:
1.
Open the Windows Control Panel, select the Network Connections item in Control Panel. A list of
existing dial-up and LAN connections will appear.
2.
Choose the Create a new connection item from the left-hand side of the window as shown below.