
Programming the oven (MS002 only)
IMPORTANT: THE CLOCK MUST BE SET TO ENABLE THE OVEN TO WORK.
The alert beep will cut off after seven minutes if it is not switched off manually.
Setting the clock
The clock is preset to 00:00, and will revert to this after a power failure.
•
With the oven switched off, press buttons 2 and 3 at the same time.
•
Select the correct time by pressing the increase and decrease buttons.
When the correct time is shown on the display, the clock will set after approximately five seconds’ delay.
Setting the volume of the beep
•
When the current time is shown on the clock display, press and hold button 5. The beep will sound three times.
•
Continue to press button 5 until the volume is at the correct level. Each press of the button will cycle through
the options.
The minute minder
The minute minder can be used when the oven is switched on or off. It can be set for up to 23 hours and 59 minutes.
To set the minute minder:
•
Press button 1.
•
Then press buttons 5 and 6 to select the required duration for the minute minder. When the correct duration
shows on the display, the minute minder will set after approximately five seconds delay.
•
A bell symbol will show in the clock display to indicate the minute minder is on.
•
When the countdown is complete, there will be a beep which will continue for seven minutes. To switch off the
beep, press any button.
•
To cancel the timer, press button 1 and then buttons 5 and 6 simultaneously.
Please note :
At the end of the countdown, the minute minder will not switch off the oven. Remember to turn off the oven manually.
5
1
2
3
4
5
6
buttons
functions
display
field
fig. 1
To confirm a selection when programming
the clock/timer, once the display shows the
preferred selection simply do not touch any
further keys for approximately five seconds.
The oven will automatically confirm the
selection.