5
Before first use
You must allow the freezer to settle for at least twenty four hours
prior to switching the power on.
It is recommended that you clean the interior of the appliance prior
to first use, using a solution of bicarbonate of soda and warm water
and then thoroughly drying the interior.
The freezer may have an odour to it at first use. This will disappear as
the appliance cools.
When first switching the appliance on it is advisable to set the freezer
to setting 3 on the thermostat dial and leaving the freezer to settle for
24 hours before adusting the temperature to the preferred setting.
Please note:
The appliance will work continuously until it comes down to the
correct temperature.
If the appliance is switched off, you should allow five minutes
before switching it on again to prevent unnecessary damage to the
compressor.
Never store inflammable or explosive items and strong corrosive
acids or alkalis in the appliance.
The presence of some frosting within the appliance is not a
malfunction of the freezer.
