5
Before first use
You must allow the fridge to settle for at least twenty four hours
prior to switching the power on.
It is recommended that you clean the interior of the appliance prior to
first use, using a solution of bicarbonate of soda and warm water and then
thoroughly drying the interior.
The fridge may have an odour to it at first use. This will disappear as the
appliance cools.
The green power light and the red temperature warning light on the
control panel will be lit when you have plugged the appliance in to the
power supply. The temperature warning light will remain on and the over
temperature alarm will beep until the appliance reaches the required
temperature.
Please note:
The appliance will work continuously until it comes down to the correct
temperature.
If the appliance is switched off, you should allow five minutes before
switching it on again to prevent unnecessary damage to the compressor.