Matrix MDI6011, Manual For Installation, Use And Maintenance, Page: 8 / 32

8
Press the Delay button to change or cancel the delayed start. If you switch
off the machine while delay timer is active, the delayed time is cancelled.
The delay time indicator (5) will illuminate for the corresponding time set.
“Salt” and “Rinse Aid” warning lights and “End of Programme” light (6)
When either the dishwasher salt or rinse aid begins to run out, a warning
light will illuminate to advise that it needs refilling.
When the programme is complete, the dishwasher will emit five beeps
and the “End of Programme” light will illuminate.
“Programme Indicator” lights (8)
These lights will illuminate to confirm which programme has been
selected. If there is a fault on the dishwasher, the fault code will show on
these lights (page 20).
Starting a programme
• Press the “On/Off” button (the “End of Programme” light will be switched
on).
• Press the “Programme Selection” button until the required programme is
shown on the indicator lights.
• Once a programme is selected, the “End of Programme” light will
switch off.
• When you close the dishwasher door, the programme will start
automatically.
• If possible, avoid opening the door once a programme has started.
Please note: The dishwasher stores the most recently used
programme in its memory. To change the programme, simply press
the “Programme Selection” button.