39
DISMOUNTING THE UNIT
WARNING!
The ES uses a fixed flywheel that builds momentum and will keep the pedals turning
even after the user stops pedaling or if the users feet slip off. DO NOT ATTEMPT TO
REMOVE YOUR FEET FROM THE PEDALS OR DISMOUNT THE MACHINE UNTIL BOTH
THE PEDALS AND THE FLYWHEEL HAVE COMPLETELY STOPPED.
Use one of the following methods to stop the pedals:
•
Reduce your pedal speed until you come to a complete stop.
•
Push down on the brake knob to come to a complete stop.
•
Increase the resistance by turning the resistance knob in a clockwise position
until you come to a complete stop.
Failure to follow these instructions may lead to loss of control and the potential for
serious injury.
PREVENTATIVE MAINTENANCE TIPS
Consistently following this maintenance schedule will increase the life of your
ES Indoor Cycle.
BIKE LOCATION
Locate Bike in a cool, dry place.
BEFORE EACH CLASS
Check that the pedals, seat levers and handlebar levers are tight.
AFTER EACH CLASS
•
Release all tension from the brake.
•
Check that the pedals are in good condition and
properly tightened to prevent damage.
•
Simply dry the ES with a towel to remove sweat and dirt.
NOTE: Never use abrasive cleaning liquids or petroleum-
based solvents when wiping down the cycle!
DAILY MAINTENANCE
These procedures are intended to prevent rust/corrosion and to
maintain the daily performance of your ES Indoor Cycle.
Wipe down the cycle at the end of each day (preferably at the end of each
class). Use an absorbent cloth, and focus on all areas where sweat can fall
or collect. Special attention should be given to the following areas:
•
Flywheel
•
Brake assembly
•
Seat post and handlebar stem
NOTE: Be sure to wipe the entire length of the seat post and handlebar stem!
•
Seat and seat adjustment levers
•
Handlebar and handlebar adjustment levers
•
Belt guard
•
Front and back support feet
ENGLISH