background image

Battery Back-up

Yes (upto 2 Hours)

User Capacity

50,000

Event Logs

5,00,000

Templates
Capacity

25000 (1:N mode) and 1 lakh (1:1 mode)

Built in Bluetooth

Input Power

12 VDC @2A

Yes BLE (4.2 and above)

0°C to +45°C  

Type of Card

Technical Specifications

Operating 
Temperature

COGNIFACE 

INTEGRA100/200E

EM Prox

Mifare/ Desfire/ 
NFC

Buzzer

Yes 

Assigning IP Address and Other Network 
Settings

For Face Recognition feature to work successfully, all the devices i.e COSEC 
ARGO device, IP Camera and FR module must be in same network by default.

1.

 Consider the default IP Address of ARGO as: 192.168.50.1, default IP Address 

of IP Camera as 192.168.

3 and default IP of FR module as: 192.168.50.2. 

50.

2. 

Now once all the devices are connected online, add ARGO door in COSEC 

software and assign the users. 

3. 

Configure FR Settings on Door for the users.

27

28

1.

 Enable Face Recognition feature for the users from User Configuration.

2.

 Assign ARGO door to the users. Ensure that COSEC ARGO Door, FR Module 

and IP Camera are in the same subnet.

3. 

On ARGO Door Device Configuration page, select the Capturing device as IP 

Camera in Video Surveillance section. Configure the MJPEG URL of IP Camera in 
Advance Settings.  

4. For configuring FR Settings on ARGO Door, go to ‘Identification Server’ in 
Device Configuration page of ARGO. Enable FR and select FR Mode as Local. 
Enter the FR Server. After all settings are done, click on “Save”.

For more details, Refer COSEC User Guide. 

Built in Wi-Fi

Yes

COGNIFACE 

INTEGRA100/200I

COGNIFACE 

INTEGRA100/200M

Specification

Parameters

HID I CLASS/ HID 
Prox/ EM Prox/ 
Mifare/ Desfire/ NFC

For Configuring FR 

For Face recognition, there should be availability of platform and FR 
Licenses. 
Also check the supporting version of COSEC Server and COSEC Desktop 
Utility- COSEC Enroll installed in computer.
Ensure all licenses are activated.

Weight

1.82 Kg (Approx)

Dimension

Width: 193mm, Height: 311mm, 
Diameter: 69mm

(without dome)

/ 114mm

(with dome)

Credential Support

COGNIFACE INTEGRA100

COGNIFACE INTEGRA200

Face, PIN and RFID Card

Finger, PIN and RFID Card

Summary of Contents for COSEC COGNIFACE INTEGRA200

















Reviews: