15
Introduction
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the
accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.
Proper use
The rechargeable precision rotary tool with the
corresponding accessory (as supplied) is intended
to be used for drilling, milling, engraving,
polishing, cleaning, grinding, cutting and sawing
materials such as wood, metal, plastic, ceramics
or stone in dry environments. Any other use
or modification to the drill / grinder shall be
considered as improper use and could give rise
to considerable dangers.
The manufacturer will not accept liability for
loss or damage arising from improper use. Not
intended for commercial use.
Features and equipment
Cordless multi-grinder: see Fig. B1
1. Rotational speed control
2. Battery-operated LED
3. On / Off switch
4. Clamping nut
5. Spigot nut
6. Spindle lock
7. battery charger
Accessories (see Fig. B2):
8. 20 Pcs Cut Off Wheels
9. 32 pcs Sand papers
10. 5 pcs Drills(1x1.6mm, 2x2.3 mm, 2x3.2 mm)
11. 10 pcs Diamond bits: Ø 3.2 mm
12. 10 pcs Grinding wheels with shank: Ø 3.2 mm
13. 4 pcs Brush: Ø 3.2 mm
14. 16 pcs Sanding drum
15. 1 pc Dressing stone
16. 8.4 pcs Collets(1x1.6 mm, 1x2.3 mm, 2x3.2
mm)
17. 2 pcs Sanding band: Ø 3.2 mm
18. 2 pcs Hss cutter: Ø 3.2 mm
19. 3 pcs Mandrel: Ø 3.2 mm
20. 1 pc Felt wheel pointed
21. 5 pcs Felt Wheels
22. 2 pcs Polishing wheels: Ø 3.2 mm
23. 1 pc Cloth wheel
Technical information
Rated voltage: 3.6 V
No-load speed: n
0
0–18000 min
-1
Max. disc ø: 35 mm
Drill chuck clamping range: max. ø 3.2 mm
Rechargeable battery pack CMG 3.6V Li:
Rated voltage: 3.6 V
Capacity: 1300 mAh Li-ion
Battery charger CMG 3.6V Li:
Rated voltage: 100-240V~, 50/60Hz
Rated input: 30 W
Rated voltage: 5 V
Charging current: 300 mA
Charging duration: 3 hours
Protection class: II/
Noise and vibration data:
Measured values for noise are determined in
accordance with EN 60745. The A-weighted noise
level of the electrical power tool are typically:
Sound pressure level: 75 dB(A)
Sound power level: 86 dB(A)
Uncertainty K: 3 dB(A)
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration: 2,592 m / s
2
Uncertainty K = 1.5 m / s
2
GB
