Matrix Vision mvBlueLYNX-X Technical Manual Download Page 19

Page: 19 / 236

3 Revisions

Date

Rev.

Author

Description

22 April 2016

1.49

LAN

Removed sensor -102d.

15 April 2015

1.47

LAN

Added lens protrusion data.

2 February 2015

1.46

LAN

Removed Gigabit Ethernet cables from accessories.

10 July 2014

1.46

LAN

Corrected distance of the mounting holes on the back in
Dimensions of mvBlueLYNX-X.

02 July 2014

1.45

LAN

Added new troubleshooting solution How can I find my
mvBlueLYNX-X in the network?.

27 March 2014

1.44

GRA
LAN

Corrected info about OpenGL® ES and added glossary term.
Added color code of cable KS-BLX-PWR in Circular connector
male.

19 March 2014

1.43

LAN

Added accessory KS-BLX-PWR.

05 February 2014

1.42

LAN

Added use case for linescan mode.

04 December 2013

1.41

LAN

Added information about mvBlueLYNX-X option -xx9x
(mvBlueLYNX-X without housing) in Technical Data.

29 November 2013

1.40

LAN

Corrected nomenclature concerning module version and added
order sample.

25 November 2013

1.39

RIN
LAN

Information about file .gdbinit for the eclipse gdb debugger
Updated scope of supply.

7 November 2013

1.38

LAN

Added White balance with pixel format YUV422Packed.

22 October 2013

1.37

LAN

Added webcast about XForwarding on Windows.

21 October 2013

1.36

LAN

Updated chapter First Start.

15 October 2013

1.35

LAN

Added webcast links which are indicated by following symbol:

Added chapter Bit-shifting an image.

14 October 2013

1.34

LAN

User Set Default Selector is deprecated and will be replaced by
User Set Default.

02 October 2013

1.33

LAN

Added max current consumption of the digital inputs.

12 September 2013

1.32

GRA
LAN

Added note about the need to install the recommended packages
when debugging threaded applications.
Corrected dimensional drawing in Dimensions of
mvBlueLYNX-X.

23 July 2013

1.31

LAN

Added note about Power over Ethernet (PoE). With the POE
option, the camera is a class 2 compliant PoE device.

19 June 2013

1.30

LAN

Added figure in add-on board BLX-IO.

13.06.2013

1.29

LAN

Added information about add-on board BLX-IO.

26 April 2013

1.28

GRA

Added information about the mvimpact-acquire-dotnet-apps
IPK.

18 April 2013

1.27

LAN

Added chapter Using the serial port.

28 March 2013

1.26

LAN

Updated use case Creating a debouncing filter at the inputs.

19 February 2013

1.25

LAN

Added section MonoDevelop (IDE) for .NET developers.
Added new chapter X11.

MATRIX VISION GmbH

22 April 2016 Version - 1.49

Summary of Contents for mvBlueLYNX-X












































































































































































































































Search results

Summary of Contents for mvBlueLYNX-X

Reviews:

Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 19 / 236

Search results

Summary of Contents for mvBlueLYNX-X

Reviews: