Matrix Vision mvBlueLYNX-X Technical Manual Download Page 36

Page: 36 / 236

Accessories for the mvBlueLYNX-X

MVBL-X I/O-BOX

I/O-Box to connect and test a mvBlueLYNX-X camera, to loop the camera into an existing system, and to mix both connection variants selectively.
Manual:
http://www.matrix-vision.com/smart-vision-sensor-mvbluelynx-x.html?file=tl_files/mv11/support/Manuals/MV-X_IO-BOX_technical_manual_en.pdf

KS-BLX-IO6 02.0

I/O cable for additional I/Os.

KS-BLX-PWR

Ready-made connection cable for power and I/O, length up to 20 m.

KS-BLX-VGA-USB
01.0

USB 2.0 cable and VGA cable for mvBlueLYNX-X, Hirose 12pin to USB2-A and VGA, length 1 m.

KS-BLX-VGA-USB
05.0

USB 2.0 cable and VGA cable for mvBlueLYNX-X, Hirose 12pin to USB2-A and VGA, length 5 m.

MICRO SD CARD
8GB

External MicroSD memory card with 8 GB.

MV-DC1201 BLX
IO

Power supply 12V for mvBlueLYNX-X with digital I/O on separate cable, length: power 3 m, I/O: 0.5 m.

mvBlueLYNX-X Technical Manual

22 April 2016 Version - 1.49

MATRIX VISION GmbH

Summary of Contents for mvBlueLYNX-X












































































































































































































































Search results

Summary of Contents for mvBlueLYNX-X

Reviews:

Matrix Vision mvBlueLYNX-X, Technical Manual, Page: 36 / 236

Search results

Summary of Contents for mvBlueLYNX-X

Reviews: