MSC-XDM4000 Product Manual
a value other than 0, the secondary level control is disabled. Can only be assigned a non-zero value if
Level1 Override is also non-zero. If set to 3 for example, the secondary level would be level 3.
2.6 Command Tab
Figure 14: Command Tab
The Command Tab (Figure 14) provides access to the Mascot protocol interface. Commands are typed on the
Command text entry line followed by pressing the Enter key to execute them. The results will be displayed in
the text area below the command line. Clicking the
Clear Output
button will clear all command output in the
lower area.
for more information.
Page 22 of 64
© 2013-2016 Matrix Switch Corporation
